16-18 September 2018
London Olympia, National Hall

Plasa 2018

Exhibitor Products

Hero Subpage

plasa

Hero Subpage - View Show Floorplan

Plasa focus leeds lights BG

RTI NANO RGB 30 OPSL

Laserworld D11

The RTI NANO RGB 30 OPSL has a guaranteed output power of 30'000 mW full-color RGB and an incredible white balance. The benefits include:
 

KEY FEATURES

  • Very low divergence, thus very good visible even from longer distance
  • New digital amps for the scanners - for increased scan speed and scanning accuracy
  • New: Motorized Color Convergence Alignment available as option

 

  • 30'000 mW guaranteed output power after optics
  • despite the high power it is possible to reach a maximum scan speed of 45kpps@8° ILDA. High speed scanner upgrade with CT-6215HP is also available.
  • low divergence upgrade is available too: with the EMS-9000 scanners, the beam size grows to 10mm, but divergence reduces for perfect long distance projections.
  • high-precision diode arrays (red, blue) provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter! (With the LD-upgrade divergence: <0.6mrad)
  • green Coherent Taipan OPSL module, which stand out due to beam precision
  • an extremely high output power with a balanced power distribution: 12'000mW / 638nm red, 10'000mW / 530nm green, 4'500mW / 462nm cyan, and 6'500mW / 450nm blue.
  • new technology for increasing the beam precision of the single-mode diodes
  • brilliant colors and great color fading
  • the RTI NANO RGB 30 OPSL impresses with a very bright 638 nm red
  • newly developed electronics with calibration capability via a browser interface
  • emergency stop signal can be looped through several RTI NANO systems, which means that one emergency stop is sufficient for all devices
  • quality product, made in Germany
  • Robust and dustproof housing, which also makes it possible to use it outdoors without problems

INCLUDING BROWSER INTERFACE 

Easily connect to the RTI NANO laser with PC, MAC, tablet or mobile phone over LAN and adjust color balance, scanner position and scanning size, safety features and more. Laser configuration made easy - even if the system is mounted and not physically accessible any more.

OPTIONS 

  • NANO LD - Low Divergence
  • Scanner upgrade: CT-6215HP (combinable with most other options)
  • Motorized color alignment
  • RTI GOBO Wheel
  • Pangolin FB4

The RTI NANO RGB 30 OPSL is equipped with laser diode modules and green OPSL module with a very homogenous and balanced setup. The special modules ensure brilliant colors, a homogeneous white and great color mixture. The 638 nm light red sources ensure a very good visibility of the red color spectrum. The high-precision diode arrays emit with very small beam diameters and at the same time have an excellent divergence of less than 1.0 mrad (or even <0.6mrad with the special low divergence optics). The beam precision of the single-mode diodes was significantly increased by new methods of beam shaping. The diode laser modules are manufactured by Ray Technologies in Germany.

The green Coherent Taipan OPSL module stand out due to beam precision.

The RTI NANO RGB 30 OPSL is equipped with high-speed scanners, that make the unit perfect for high professional and demanding applications.

By default, the RTI NANO RGB 30 OPSL is controlled via ILDA and is equipped with advanced electronics that allow for laser calibration via browser interface. The browser interface works with PC, MAC, Linux, tablet, mobile phone, etc., so the on-site calibration of this laser system is easy and does not require any physical access to the laser after set up any more. It connects via LAN (WIFI is also possible with a suitable access point) and contains calibration options or color balance, scanning position, safety features etc. 
Optionally the system can also be supplied with an embedded FB4 (LAN, DMX, SD card operating modes). An external remote control pad is available on request. There is an 'ILDA-IN' interface as well as an 'ILDA-Through' on the back of the device to daisy-chain the control signal. The emergency stop / interlock signal can also be daisy chained for several RTI NANO laser systems, which means that only one emergency stop is sufficient for all RTI NANO devices connected to one another.

 
Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The powerful RTI NANO RGB 30 OPSL is suitable for indoor and outdoor show laser applications at concerts, festivals and other major events. Demanding graphics projections or projections over long distances are possible without any problems.

The RTI NANO RGB 30 OPSL is a quality product manufactured in Germany.

 

#rti #laserworld #rtinano #nano #laser #showlaser #lasershow #laserprojector #laserworldgroup #laserworlduk #whitelight #laserlight #laserbeam #highpowerlaser

Loading
See you at next year's show!

See you at next year's show!

Register your interest

 

Exhibitors

189

Seminars

66

Speakers

88

Days

3

Our Sponsors


 

Audio

Audio

Audio

AV

AV

Lorem ipsum dolor sit amet, consectetuer adipiscing elit.

Lighting

Lighting

Lorem ipsum dolor sit amet, consectetuer adipiscing elit.

Stage Technology

Stage Technology

Lorem ipsum dolor sit amet, consectetuer adipiscing elit.

Rigging

Rigging

Lorem ipsum dolor sit amet, consectetuer adipiscing elit.

 

Testimonials

  • It was a really impressive show. Every time I looked there were lots of conversations going on around the show floor. I think every exhibitor should be happy. It was magic!
    Mick Hannaford
    Robe
  • We rate PLASA as one of the best shows in the world. We’ve had a really successful event, meeting our European clients and securing new overseas contacts as well as visitors from closer to home.
    Gary Fails
    City Theatrical
  • The show was incredibly busy, I didn’t have a moment of quiet time. I’ve seen more international visitors here this year which is great. I love it!
    Darren Beckley
    ETC Ltd
  • We’ve been exhibiting at PLASA for around 10 years and show both competing and complementary technologies, allowing our customers to see the differences between them. No one feels they’re getting the hard sell, it works very well.
    John Penn
    SSE Audio
  • We were delighted that 80% of our European distribution network came to the show, and we had visitors from Korea, Hong Kong and the US. The stand was really busy and we’ve thoroughly enjoyed the show.
    Matthew Lloyd
    GDS
  • This year’s PLASA show was one of the busiest ever, and in my opinion, it was also one of the best we’ve exhibited at. All in all, it was a very positive show for us and our suppliers.
    Jonathan Walters
    A.C. Entertainment Technologies
  • The show was genuinely good and there was a buzz. We certainly had a crowded stand and we hope the successful launching of new products brings the results we want. May PLASA continue for many more years.
    Cliff Dounting
    Chauvet
  • I am a big fan of PLASA London since the move and believe that the PLASA team have totally re-invigorated the show and established it as the product show in the UK, where the UK market turn to look at new products.
    Ben Noble
    Push the Button

Hero Subpage - View Show Floorplan

Plasa focus leeds lights BG